Water and solid contaminants are very effectively removed out from the oil with the EF2100 oil cleaning systems.
The EF2100 Oil Cleaning Systems (OCS) are offline units which means that a small amount of oil is taken from a tank or continuously bypassed from a main ring line, cleaned in the OCS and then returned as clean oil into the oil system/machine concerned.
The OCS are individual circuits and will not affect any functions in the concerned oil system/machine. The standard cleaning systems consist of 1-6 cleaning housings which are connected in parallel.
Oil volume and viscosity decides the number of housings needed for a proper cleaning efficiency. Each system consist of motor with pump, oil sample valve before and after/bleed valve, drain valve, pressure gauge and armoured hydraulic hoses. The components are mounted on a steel plate.
Oil Heating belt, support legs, visual flow indication, flow control incl. Display with alarm functions, 3phase motor, replacement of motor & pump by pressure reducing valve, air pump, non-return valve or systems for ATEX directive.
(Measure & weight depends on options).
If your system is in our common standard there is specific information about it in a brochure outset of this manual.
About This Community
|Asked: 12/19/19, 6:11 AM|
|Seen: 63 times|
|Last updated: 12/19/19, 6:11 AM|